Welcome to TP-LINK Tech Support Forum
  1. Announcement:
    The migration of TP-Link Community
    tplink ‎(Administrator)
    09-30-2018
    Views:
    937
  2. Announcement:
    New TP-Link Community
    tplink ‎(Administrator)
    07-22-2018
    Views:
    90,413
  3. Announcement:
    TP-LINK Forum Rules
    tplink ‎(Administrator)
    09-09-2012
    Views:
    40,708
+ Post New Thread
Page 1 of 2 1 2 LastLast
Threads 1 to 23 of 46

Forum: FAQ

  1. Lightbulb (FAQ_Basic Configuration) What is the Default BootUtil Password of the Switch?

    No password needed. The switch does not support setting the BootUtil password.

    Started by TP-Link_Document‎, 02-09-2018 02:00
    • Replies: 2
    • Views: 3
    05-25-2018, 10:44 Go to last post
  2. Lightbulb ( FAQ_Ethernet Switching) How Do I Create VLANs in a Batch?

    In global configuration mode, enter vlan vlan-list command to create VLANs in a batch. ■ Create 10 contiguous VLANs in a batch: VLAN 10-19 Switch#configureSwitch(config)#vlan 10-19 ■ Create 10 discrete VLANs in a batch: VLAN 2-9,20,30 Switch#configureSwitch(config)#vlan 2-9,20,30

    Started by TP-Link_Document‎, 01-22-2018 03:05
    create vlans in a batch, ethernet switching
    • Replies: 2
    • Views: 3
    05-25-2018, 10:07 Go to last post
  3. Lightbulb (FAQ_Hardware) What Does the Package Contain?

    The package contents for the switch are as follows: ▲One switch ▲One power cord ▲Two mounting brackets and the fittings (For the specific number of fittings, please refer to the QIG)

    Started by TP-Link_Document‎, 03-09-2018 07:36
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:36 Go to last post
  4. Lightbulb ( FAQ_Hardware) Is the Interface Card (TX 432) Hot-pluggable?

    The interface card is hot-pluggable. It has two 10G SFP+ ports, and is compatible with T2700G series switches/T3700G series switches.

    Started by TP-Link_Document‎, 03-09-2018 07:31
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:31 Go to last post
  5. Lightbulb ( FAQ_Hardware) Will the PoE Function of PoE Switches be Affected When a 110V Power Source is Used?

    110V lies inside of the valid voltage range 100~240VAC supported by TP-Link switches. So the PoE function of PoE switches will not be affected when a 110V power source is used.

    Started by TP-Link_Document‎, 03-09-2018 07:30
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:30 Go to last post
  6. Lightbulb (FAQ_Hardware) Does the SFP+ Port Support 1Gbps?

    For T3700G-28TQ/T3700G-52TQ/T2700G-28TQ, the SFP+ port only support 10Gbps. For T1700G-28TQ/T1700X-16TS, the SFP+ port supports 1Gbps. The premise is to set the speed mode as 1000M for the SFP+ port. The following example shows how to set the speed mode as 1000M for the SFP+ port 25 on...

    Started by TP-Link_Document‎, 03-09-2018 07:27
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:27 Go to last post
  7. Lightbulb (FAQ_Hardware)Does the Switch Support the Optical Modules of Other Vendors?

    Generally, the switch supports the optical modules of other vendors as the TP-Link switches are in accordance with the industrial standard. However, some vendors customize their products for specific purposes and their products may not be compatible with the TP-Link switches. Here you are...

    Started by TP-Link_Document‎, 03-09-2018 07:24
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:24 Go to last post
  8. Lightbulb (FAQ_Hardware)Are the Switches Equipped with Fans?

    Some layer 3 switches and PoE switches are equipped with fans for heat radiation. At present, T3700G-52TQ, T3700G-28TQ, T2700G-28TQ, T2600G-28MPS (TL-SG3424P), T1700X-16TS, T1600G-28PS (TL-SG2424P), T1600G-52PS (Tl-SG2452P), T1500-28PCT (TL-SL2428P) and T1500G-10MPS are all equipped with...

    Started by TP-Link_Document‎, 03-09-2018 07:15
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:15 Go to last post
  9. Lightbulb (FAQ_Hardware)Does the Switch Interface Support 100M Optical Modules?

    All the switches with SFP ports support 1000M Optical Modules. Some switches also support 100M Optical Modules such as T1500G-10MPS, T1500G-10PS and T2600G-18TS. As the device connected to the port should be in the same speed mode as the port, please set the speed mode as 100M for the SFP port...

    Started by TP-Link_Document‎, 03-09-2018 07:13
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:13 Go to last post
  10. Lightbulb ( FAQ_Hardware) Does the Switch Support PoE?

    Switches that contain the letter P in their model name support PoE. For example, T2600G-28MPS is a PoE-capable switch.

    Started by TP-Link_Document‎, 03-09-2018 07:09
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 07:09 Go to last post
  11. Lightbulb ( FAQ_Hardware) Can the Switch Use DC Power Supply?

    All the switches can use AC power supply. Some layer 2 and layer 3 managed switches such as T2700G-28TQ and T3700G-28TQ which support TP-Link RPS (Redundant Power Supply) can also use DC power supply for the purpose of backup. Thus the switches can work uninterruptedly in the event of an...

    Started by TP-Link_Document‎, 03-09-2018 07:03
    • Replies: 0
    • Views: 1
    03-09-2018, 07:03 Go to last post
  12. Lightbulb ( FAQ_Hardware) Temperature Information of the Switch

    What is the Operating Temperature and Storage Temperature of the Switch? Operating temperature: 0C to +40C Storage temperature: -40C to +70C How Can I View the Temperature of the Switch? For T3700G-52TQ, you can run the show environment temperature command in Privileged EXEC mode...

    Started by TP-Link_Document‎, 03-09-2018 06:59
    hardware
    • Replies: 0
    • Views: 1
    03-09-2018, 06:59 Go to last post
  13. Lightbulb ( FAQ_Ethernet Switching) Can the Switch be Configured Not to Block the Port After Detecting Loops?

    You can configure the switch to send alerts and block the port, or only send alerts. The alerts include sending a trap message and generating an entry on the log file. To block the port, you can choose the block mode as port-based or VLAN-based. ■ Port-based: Totally block the port. No...

    Started by TP-Link_Document‎, 01-22-2018 09:34
    ethernet switching
    • Replies: 1
    • Views: 2
    02-25-2018, 07:28 Go to last post
  14. Lightbulb (FAQ_Basic Configuration) What Types of Ports can be Used for FTP File Transfer?

    If the FTP client software has been installed on the client and the client can successfully ping the server, the FTP file can be transferred successfully. All the Ethernet ports can be used for FTP file transfer.

    Started by TP-Link_Document‎, 02-09-2018 02:34
    • Replies: 0
    • Views: 1
    02-09-2018, 02:34 Go to last post
  15. Lightbulb (FAQ_Basic Configuration) How Do I Upload and Download Files?

    You can upload or download files through FTP, TFTP or the console port. ● The following example shows how to back up the configuration files to TFTP server with the IP 192.168.0.148 and name this file config.cfg: Switch #copy startup-config tftp ip-address 192.168.0.148...

    Started by TP-Link_Document‎, 02-09-2018 02:32
    • Replies: 0
    • Views: 1
    02-09-2018, 02:32 Go to last post
  16. Lightbulb (FAQ_Basic Configuration) How Do I Save My Device Configuration?

    You can use copy running-config startup-config command in privileged EXEC mode to save the device configuration information. You are suggested to save the device configuration information before cutting off the power or rebooting the switch to avoid losing the new configurations.

    Started by TP-Link_Document‎, 02-09-2018 02:25
    • Replies: 0
    • Views: 1
    02-09-2018, 02:25 Go to last post
  17. Lightbulb (FAQ_Basic Configuration)How Do I Restore the Switch to Default Factory Settings?

    For the switches with a Reset button, press the Reset button for at least 5 seconds to restore all the configurations to factory defaults. The default login username and password are both admin. For switches without a Reset button, you can use reset command in privileged EXEC mode to reset the...

    Started by TP-Link_Document‎, 02-09-2018 02:23
    • Replies: 0
    • Views: 1
    02-09-2018, 02:23 Go to last post
  18. Lightbulb (FAQ_Basic Configuration) How Do I Use the Web System to Log in to the Switch?

    Enable the HTTP server to use the web system to log in to the switch. As the HTTP server is enabled by default, you can use the web system to log in to the switch directly.

    Started by TP-Link_Document‎, 02-09-2018 02:15
    • Replies: 0
    • Views: 1
    02-09-2018, 02:15 Go to last post
  19. Lightbulb (FAQ_Basic Configuration) What Are the Different USB Ports?

    For TP-Link switches, there are two kinds of USB ports: Micro-USB console port and standard USB port. Micro-USB console port: It can be used for console connection. If you are using the USB port on the MAC OS X or Linux OS for console connection, there is no need to run a USB driver. If you are...

    Started by TP-Link_Document‎, 02-09-2018 02:13
    • Replies: 0
    • Views: 1
    02-09-2018, 02:13 Go to last post
  20. Lightbulb (FAQ_Basic Configuration) How Do I Configure an IP Address for the Management Port of the Switch?

    The management port is used for out-of-band management which means you can use a a dedicated channel to manage the switch. Thus the control information can be separate from the data information. Users can manage and monitor the switch without occupying the Ethernet port on the switch and the...

    Started by TP-Link_Document‎, 02-09-2018 02:09
    • Replies: 0
    • Views: 1
    02-09-2018, 02:09 Go to last post
  21. Lightbulb (FAQ_Basic Configuration) Can the Web-based Network Management System on the Switch be Disabled?

    For T2500-28TC/T2700G-28TQ/T3700G-28TQ, the web-based network management system cannot be disabled. For other switches, you can use no ip http server or no ip http secure-server command to disable the web-based network management system. When the web system is enabled, it will produce...

    Started by TP-Link_Document‎, 02-09-2018 02:08
    • Replies: 0
    • Views: 1
    02-09-2018, 02:08 Go to last post
  22. Lightbulb (FAQ_Basic Configuration) How Many VTY (Virtual Teletype Terminal) User Interfaces Does a Switch Support?

    By default, the switch allows a maximum of 5 VTY users at a time. You can set the maximum number of VTY users allowed using the line vty startlinenum endlinenum command in Global Configuration Mode. The switch can support at most 16 VTY users. The following example shows how to set the...

    Started by TP-Link_Document‎, 02-09-2018 02:06
    • Replies: 0
    • Views: 1
    02-09-2018, 02:06 Go to last post
  23. Lightbulb (FAQ_Basic Configuration) Why am I Unable to Log In to the Switch Using Telnet?

    The possible causes are: No reachable route is available between the PC and switch, so a TCP connection cannot be set up. Use the ping command to check whether the switch is reachable from the PC. 1) The telnet function is disabled. You can use telnet enable command in Global...

    Started by TP-Link_Document‎, 02-09-2018 02:03
    • Replies: 0
    • Views: 1
    02-09-2018, 02:03 Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 18 replies or 150 views
Hot thread with unread posts
More than 18 replies or 150 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.