Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Unhappy TL-WPS510U / Epson not showing ink levels or paper jams anymore

    Model : TL-WPS510U (UN)

    Hardware Version : 6.0

    Firmware Version : 9.08.55T 0008 (2016/02/22 14:38:44)

    ISP : N/A

    Hi there. This is my first post here.
    I installed a TL-WPS510U on my printer Epson T1110 and now it doesn't show anymore the ink levels or if there is a paper jam.
    The bidirectional communication and SNMP are already enabled under configurations.
    What am I doing wrong? Don't know what else I could do.
    Last edited by brackmann; 08-31-2017 at 11:50.

  2. #2
    1. check the “LPR Byte Counting Enabled, http://www.tp-link.com/en/faq-671.html
    2. check your printer settings.
    3. if it worked fine before, reboot the printer and print server, or reconfigure it.

  3. #3
    Hi Shield101!
    Thanks for your reply. The LPR Byte Counting was disabled, but even enabling, it doesn't work. I followed the whole tutorial.
    I also completely disabled my firewall and... nothing.
    Any other suggestions? The ink and paper jam is a very important feature.
    Thanks in advance for any other help.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.