Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 16 to 20 of 20
  1. #16
    A1: The slave Deco unit will not be router mode, if you didn't connect the slave deco to main deco by ethernet cable, it would be like extender, then if you connect an ethernet cable between them, the slave deco would be working with ethernet backhaul, no need to switch the mode manually;
    A2: Similar to the question 1, after you install all the 3 Deco normally, the main Deco is on router mode, the other two slave Deco are in extender or access point mode, when you switch the mode on the Deco App, it is changing the mode on the main Deco.

  2. #17
    Hi Enson Loo

    Many thanks for your help, it works fine now and I understand the difference.


  3. #18
    Junior Member gavvythegunner is on a distinguished road
    Join Date
    Nov 2017
    I have firmware version 1.2.12 (acording to about menu option) the only options in "advanced" are " ipv4 ipv6 Led.. and Notifiictaions" I need to set up AP nodes and dont seem to have the option to access the features outlined in the AP node "Howto" as outlined on this thread
    I have tried doing further firmware updates but I get a failure message, any suggestions?

  4. #19
    A to Q2:
    yes, the third Deco would automatically turn into AP mode, no extra work needed.
    A to Q1:
    All 3 Deco would turn into AP mode together with a click of one button.

  5. #20
    Junior Member zsgacsy is on a distinguished road
    Join Date
    Jan 2018
    I have some questions.

    I have configuring Deco Ap mode
    and all Deco's working on the same frequency, how to reconfigure it?
    Deco Ap mode does not have a guest network, is it upgraded?
    Deco router mode does not have IP configuration options, is it upgraded?

    Thank you for your help


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.