Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Junior Member dloflin is on a distinguished road
    Join Date
    Jul 2017
    Posts
    1

    TL-SG1016PE - passive or active PoE

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Was trying to find out if the PoE ports on the TL-SG1016PE switch were passive or active?

    I am using with MokroTik and it is passive.

  2. #2
    It's either passive or standard I believe. And since it lists 802.3af/at then it should be standard.



  3. #3
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,127
    The TL-SG1016PE uses PoE according to IEEE 802.3at. If you want to call that "active", it's active, but usually it's just called PoE+ (not compatible with MikroTik's PoE).


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.