Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Tunel IPSEC with 2 TL-ER6120

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I try to connect two TP-Link TL-ER6120 through an IPSEC tunnel. I followed the steps in the manual, but the tunnel does not rise.

    I have seen in the forum an article on creating a tunnel between a TL-ER6120 and a TL-R600VPN.
    I followed the steps and I can not get the tunnel to connect.

    Can somebody help me?

  2. #2
    Members Mr.J is on a distinguished road
    Join Date
    Aug 2016
    Posts
    114
    Is there any other NAT device before the ER6120? If so, you have to do other setting on them.
    If not, you can put the setting screenshots here, I can try to help you find the problem.

  3. #3
    Behind each tp-link I have an operator router.

  4. #4
    Members Mr.J is on a distinguished road
    Join Date
    Aug 2016
    Posts
    114
    Quote Originally Posted by rcolomina View Post
    Behind each tp-link I have an operator router.
    Just need to make sure the parameter for each side are opposite. You can post the configuration screenshot here. I can try help.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.