Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17
  1. #1

    T1700G-28TQ memory overflow in stacking configuration and provisioned state

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Model : T1700G-28TQ

    Hardware Version: rev1

    Firmware Version: 1.0.3 build 20160601 rel.52662(s)

    Greetings,

    I configured 3 T1700G-28TQ in stacking configuration. The problem is that every few days, I have a memory overflow on the master which falls in a provisioned state.

    There is no loopback on the network and I have no issues when the switches aren't stacked.

    Any ideas ?

  2. #2
    memory overflow! Could you find any error message in log?

  3. #3
    No error message in log table, just notifications like :

    MEMORY RISING THRESHOLD : Total Memory Utilization is 98%.

    It floods the log table until it overflows.

  4. #4
    Quote Originally Posted by Stardos View Post
    No error message in log table, just notifications like :

    MEMORY RISING THRESHOLD : Total Memory Utilization is 98%.

    It floods the log table until it overflows.
    You can ask TP-LINK, For T1700G-28TQ,I remember they have the new firmware, But I don't know why I can't find this firmware from website, The firmware is 160923, you can ask them

  5. #5
    Quote Originally Posted by Stardos View Post
    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Model : T1700G-28TQ

    Hardware Version: rev1

    Firmware Version: 1.0.3 build 20160601 rel.52662(s)

    Greetings,

    I configured 3 T1700G-28TQ in stacking configuration. The problem is that every few days, I have a memory overflow on the master which falls in a provisioned state.

    There is no loopback on the network and I have no issues when the switches aren't stacked.

    Any ideas ?


    I have the same problem.
    Unit State

    Provisioned

    Ready

    Hardware Version

    T1700G-28TQRev1

    T1700G-28TQRev1

    Firmware Version

    1.0.3 Build 20160601 Rel.52662(s)

    Power Supply Module

    Operational


    After about 2 weeks they hang. Do you solve this problem?

  6. #6
    I have the same problem.
    Unit State

    Provisioned

    Ready

    Hardware Version

    T1700G-28TQRev1

    T1700G-28TQRev1

    Firmware Version

    1.0.3 Build 20160601 Rel.52662(s)

    Power Supply Module



    After about 2 weeks they hang. Do you solve this problem?

    Operational


  7. #7
    As I told Stardos,you can contact with TP-LINK directly, they have Beta firmware.

  8. #8
    Quote Originally Posted by TPTHZ View Post
    As I told Stardos,you can contact with TP-LINK directly, they have Beta firmware.

    Thanks for advise,but did not help for me I requested this firmware. Thay sanе me T1700G-28TQv2_en_2.0.0_[20160922-rel61374]_up.bin But memory leaks out, what should I do?

  9. #9

    Unhappy I have the same problem

    Hi there,
    Is there already a solution for this?
    I seem to have the same problem, not every week but press annoying...

    Brian

  10. #10
    Quote Originally Posted by lexxus View Post
    Thanks for advise,but did not help for me I requested this firmware. Thay sanе me T1700G-28TQv2_en_2.0.0_[20160922-rel61374]_up.bin But memory leaks out, what should I do?
    You can try offical firmware http://www.tp-link.com/en/download/T....html#Firmware

  11. #11
    Quote Originally Posted by briantilburgs View Post
    Hi there,
    Is there already a solution for this?
    I seem to have the same problem, not every week but press annoying...

    Brian
    You can download the new offical firmware 170608 also.

  12. #12
    Junior Member kibnet is on a distinguished road
    Join Date
    Nov 2017
    Posts
    1
    Quote Originally Posted by TPTHZ View Post
    You can download the new offical firmware 170608 also.
    Hi

    I am experiencing the same issue. I have 2 of these stacked.

    From what I noted the Master in the stack starts with around 74% Memory usage and increases by 1% every 5 hours until it dies. The secondary switch seems to remain mostly around the 72% utilisation throughout. I am monitoring it now with SNMP to see what actually happens.

    The firmware 170608 is only for the V2 model of switch but I as well as the original poster have the V1 model, would this still work?

  13. #13

    Question

    Quote Originally Posted by TPTHZ View Post
    You can download the new offical firmware 170608 also.
    Can you tell me where? I looked on the TP-Link website but didn't find any software..

  14. #14
    Quote Originally Posted by briantilburgs View Post
    Can you tell me where? I looked on the TP-Link website but didn't find any software..
    The link as below, you can find it from tp-link global website.
    http://static.tp-link.com/T1700G-28TQ(UN)_V2_170608.zip
    If your hardware is v1, you can upgrade this firmware also.

  15. #15
    Quote Originally Posted by kibnet View Post
    Hi

    I am experiencing the same issue. I have 2 of these stacked.

    From what I noted the Master in the stack starts with around 74% Memory usage and increases by 1% every 5 hours until it dies. The secondary switch seems to remain mostly around the 72% utilisation throughout. I am monitoring it now with SNMP to see what actually happens.

    The firmware 170608 is only for the V2 model of switch but I as well as the original poster have the V1 model, would this still work?
    The offical firmware solved the issue abour memory overflow, tp-link send an beta firmware to me in the past, I asked them,they said this latest offical firmware solved this issue also.
    But I do not use stack system. maybe we meet the same issue, you can try.
    V1 can use this firmware also.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.