Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    AD7200 Access point Only (again)

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello form France
    My network is on 192.168.0.xxx
    I have plug my AD7200 on a lan port (not wan) and disable DHCP to be on the same network. It works
    I have also put an static IP on my AD7200 192.168.0.2 (my box in 192.168.0.1
    when i scan my network, i found my AD7200 on 192.168.0.53 and impossible now to reach it on any browser
    Of course, i have no other device on 192.168.0.2

    The only solution that i found to reach it again is to plug it on wan port and enable DHCP, but after i have 2 different network (and i don't want)

    Do you have any ideas ?
    Really thanks for your help
    Attached Images  

  2. #2
    change it wan to static ip 10.0.0.1 then change its lan ip to 192.168.0.252, later disable DHCP. last connect cable from main router to lan 1 of AD7200.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.