Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member JoeClark is on a distinguished road
    Join Date
    Jul 2017
    Posts
    1

    IP Config. and three cameras

    Model :

    Hardware Version : Not Clear

    Firmware Version :

    ISP : [/COLOR]

    Hello,


    I have three cameras that I've had for the past year. Everything has worked great but I just upgraded to ATT Gigapower and now my cameras are not working. Everything on the network is up and running and the three cameras have leased DHCP ip addresses but the IP configuration tool can't find them. I have searched using the range for the router and also for some tech support videos that would help. Is there something I am missing?


    Any help will be appreciated.
    Thank you.

  2. #2
    what is the model number of your ip cameras? and what is the leased DHCP ip address on them? are they in the same network as ATT Gigapower?
    And if you still remember the static ip address on the camera, you can connect a computer to the camera directly with manual ip address to login camera web page.
    But if you don't remember that, make sure computer installed ip configuration tool and camera are connected to same router.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.