Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member Dwight-L is on a distinguished road
    Join Date
    Jul 2017

    EAP 225, No SSID after adoption

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have two EAP 225 APs. When I adopt them into the controller software the controller shows "provisioning" and does not connect. When I then login to the web interface of the APs, they are without an SSID. The previous default SSID or any new one that I set using the web interface on the AP, is removed and the SSID is blank. What to do? So far I cannot use the Controller.

  2. #2
    Did you try to uninstall the EAP Controller and adopt the EAP again? It seems that the EAP Controller erased the AP's original configurations but didn't issue the new configurations. The problem maybe caused by the abnormal behavior of the EAP Controller.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.