Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Setup help Needed for a WA5210G

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi All
    Here is what I'm trying to acheive.

    I have a WA5210G which I want to use to extend the range of our network to another building on our plot.
    I have a TP LINK router in the house which, when I connect the CPE to my computer and do a survey, I can see with a signal strength of 27dB.
    I have set the CPE up as a AP and with a Wireless Mode of Client., The security passwords match the router in the house.
    I can connect to the router but, when I look at the status, the channel keeps changing and "signal" is never there for long.
    So, my question is, what have I done wrong? I intend, once I've got it connnected, and I know this should be possible, to connect a router to the LAN port of the CPE so there will be a router in the house ana router in the outbuilding
    I hope I've explained this well enough. I just cant make any more sense out of it myself.

    thanks
    Ian

  2. #2
    This is what I see on the status page.
    Wireless
    Operating Mode: Client
    Signal: 32 dB
    SSID: Terrace
    Channel: 6
    Mode: 54Mbps (802.11g)
    MAC Address: 54-E6-FC-CD-AE-**
    Traffic Statistics
    Received Sent
    Bytes: 4874 3045
    Packets: 16 21

  3. #3
    Is that possible to send your network topology here?And how abut the model number of your CPE?Are you able to connect two products together?


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.