Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Cant access EAP330 (Management VLAN - newest Firmware) after reboot

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello,

    anyone else having trouble with setting up the Management Vlan on EAP330?

    After Updating to the newest Firmware ( EAP330(EU)_V1_1705) and setting up the Management VLAN (+Static IP) i'm able to access the Webinterface... everything is working as expected.

    But after power loss or manual reboot i cant access it anymore (same Vlan+Subnet)... not even a ping is possible.

    The EAP-Controller/Discoverytool are still able to find the AccessPoint under the static IP but cant access anymore. (Timeout)

    Any ideas or known issues?

    Thanks in advance!

  2. #2
    In normal case, the management VLAN and static IP settings will not lost after power loss or manual reboot.

    i'm able to access the Webinterface

    Did you try to login the EAP's web interface or use EAP controller for management?
    If the AP is adopted by EAP controller, then we will not be able to login the EAP's web interface.

    The EAP-Controller/Discoverytool are still able to find the AccessPoint under the static IP but cant access anymore

    Is the AP in pending list of EAP controller? Is the problem that you can not adopt the EAP successfully by controller?


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.