Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Web interface access after configuring VLAN

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi
    I've followed following steps to make VLAN on my smart switch, the way I setup 2 VLAN on 2 ports and one trunk port, but once I've created this I have not able to access the smart switch web interface, router assign (DHCP) IPs for the 2 networks, I couldn't find switch IP assigned to switch to access the web interface.
    Anyone can help ?
    (I can access web GUI changing IP on PC to 192.168.0.10 (switch default network) and connect to another port on the switch (not VLAN port) but this is not I need)

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,009
    Then why don't you put the switch into the VLAN you want it to have by assigning a fixed IP from the appropriate subnet? I don't understand what's the problem doing so. If you want the switch to respond to a certain IP, you need to assign it this IP!


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.