Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Web interface access after configuring VLAN

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi
    I've followed following steps to make VLAN on my smart switch, the way I setup 2 VLAN on 2 ports and one trunk port, but once I've created this I have not able to access the smart switch web interface, router assign (DHCP) IPs for the 2 networks, I couldn't find switch IP assigned to switch to access the web interface.
    Anyone can help ?
    (I can access web GUI changing IP on PC to 192.168.0.10 (switch default network) and connect to another port on the switch (not VLAN port) but this is not I need)

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,127
    Then why don't you put the switch into the VLAN you want it to have by assigning a fixed IP from the appropriate subnet? I don't understand what's the problem doing so. If you want the switch to respond to a certain IP, you need to assign it this IP!

  3. #3
    Sounds like the Management VLAN setting on the switch may need to be changed to match the VLAN ID for whatever port you are using to connect to it.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.