Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Junior Member agelakos is on a distinguished road
    Join Date
    Jul 2017
    Posts
    1

    Second DHCP Server on LAN

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello, everybody.

    I have a new TL-WA901ND Access Point (Ver. 5.0) and I have a big problem with DHCP Service.
    The LAN-DHCP set-up of the AP is:

    Static IP: 192.168.3.19
    DHCP Start IP: 192.168.3.41
    DHCP End IP: 192.168.3.50

    I have also (in my LAN) a second DHCP Server (PBX), in another subnet (192.168.1.x).
    All the devices that connects to the new AP, requests and takes address from the PBX (192.168.1.x) and ignores the AP.
    Can someone knows something about that?
    Can my AP ignore the other DHCP server and gives the addresses by itself?

    Thank you in advance.

  2. #2
    That's what an access point should do, if you want to have two DHCP servers, then I think you need to use a router.

  3. #3
    That's what an access point should do, if you want to have two DHCP servers, then I think you need to use a router.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.