Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member gbeletti is on a distinguished road
    Join Date
    Jul 2017
    Posts
    1

    Exclamation TL-ER5120 V2 policy routing

    Model : TL-ER5120

    Hardware Version : Not Clear

    Firmware Version : 1.0.8 Build 20140212 Rel.36037

    ISP : Vivo[/COLOR]

    Hello.

    I have the load balancer TL-R480+ and bought the model TL-ER5120 V2 for this one is gigabit. When I try to configure the Policy routing on "Advanced > Load Balance > Policy Routing" just like the model TL-R480+ an error occured: "The rule you entered conflicts with rule one". Also there is no option to set the priority, the router does it by itself.

    Here some informations about the router:

    Firmware Version: 1.0.8 Build 20140212 Rel.36037
    Hardware Version: TL-ER5120 v2.0

    The problem occurs when you try to add more than one rule with 0.0.0.0, either from source and destination.


    I noticed the firmware of the 5120 is from 2014 while the R480+ is from 2015. Will TP-LINK fix these problems soon or should I buy from another brand?

    Thanks for the attention.
    Regards,
    Gabriel Beletti

  2. #2
    Hey dude, I don't know the priority. But maybe the table has a priority from top to bottom. You know, some table follow this rule.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.