Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Device selection

    Model : CPE510

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have 2 CPE510 configured in AP and Client mode. IP AP( and Client(
    If i am hide ssid on AP then connectivity of client is lost. so how configure CPE with Hide SSID mode. HArdware version v1 and firmware is latest

  2. #2
    Why do you want to hide the SSID of AP? You can simply fill in the SSID of AP instead of Survey.
    Name:  cpe510.png
Views: 0
Size:  47.8 KB

  3. #3

    Why I want to hide ssid

    I dont want to show the people that the AP is mounted nearer to me.

  4. #4
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Works for me.

    Set up the Client to lock to the AP's SSID (WiFi survey -> select AP -> click Lock to AP -> Apply -> Save).

    Disable ESSID broadcast on the AP, apply, save.

    The client CPE will disconnect from the AP (as it does if any WiFi settings are being changed).

    Wait for the client to re-connect (may need up to 10 minutes).

    Client eventually re-connects to the AP.

    Do a WiFi survey on the client to check for ESSID -> it's gone, but the AP still being recognized (the BSSID or MAC address and its name still appear in survey).


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.