Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3

Thread: 802.1X again

  1. #1

    802.1X again

    Model : T2600G-52TS

    Hardware Version : Not Clear

    Firmware Version : 2.0.0 Build 20160923 Rel.39814(s)

    ISP : -[/COLOR]

    I wish to deploy 802.1X auth in our network, but no luck. I have followed this guide: http://www.tp-link.com/hu/faq-787.html but not even able to trick the switch to try to authenticate against the radius server. Even the port stays authenticated however I expect it to change:

    Name:  asd.png
Views: 0
Size:  20.5 KB
    Any idea, suggestion... anything?

  2. #2
    I just realised that after the firmware upgrade I have booted the old one. Changing to the latest firmware did not help, still no 802.1X.

  3. #3
    Hahh, progress. Now I can see a MAB column for the port config, and enabling the MAB now I can see the access requests and answers, and enabled the network security/802.1X/VLAN Assignment too. However answering the following:
    (4) Sent Access-Accept Id 49 from to length 0
    (4) Reply-Message = "Device with MAC Address 5C-FF-35-0C-57-67 authorized for network access"
    (4) Tunnel-Type = VLAN
    (4) Tunnel-Medium-Type = IEEE-802
    (4) Tunnel-Private-Group-Id = "2"
    (4) Finished request

    I cannot see the port effected. The VLAN 2 is a blackhole one once a machine is fallen into should not able to ping outside, but it still can. My goal to use RADIUS server to auth and select VLANs for each MAC.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.