Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    How to configure IP QoS on a TP-LINK router

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Open a web browser, and in the address bar type in http://tplinkwifi.net or http://192.168.0.1, and log in with the username and password you set for the router. The default username and password both are admin (in lower case). Go to Advanced > QoS > Settings. Select the Enable QoS checkbox.
    [h=3]How to configure IP QoS?[/h]Note: You'd better set static IP Address on your network computers in order to manage easily.
    Step 1. Open the web browser and type the LAN IP address of the router in the address bar, the default IP address of TP-LINK router is 192.168.1.1, and then press 'Enter'.
    Step 2. Type the username and password in the login page, the default username and password both are admin.
    Step 3. Click 'QoS->QoS Settings' on the left of the page and select'Enable QoS'. You can configure the Upload Bandwidth and Download Bandwidth, their value you configure should be real bandwidth your ISP provides to you.
    Step 4. Click'Save'button to save the settings.
    Step 5. Click 'QoS->QoS Rules List', you can view and configure the QoS rules.
    Description: This is the information about the rules such as address range.
    Mode: Mode can be separated into "independent bandwidth" and "share bandwidth".
    Independent bandwidth: means every port has its own upload and download bandwidth, share bandwidth means address or port share upload and download bandwidth.
    Egress bandwidth: This field displays the max and mix upload bandwidth through the WAN port, the default is 0.
    Ingress bandwidth:This field displays the max and mix download bandwidth through the WAN port, the default is 0.
    Enable: This displays the status of the rule.
    Modify: Click 'Modify' to edit the rule, click 'Delete' to delete the rule.

    Step 6. Click 'Add New' to add a new rule.

    Visit my Blog :- Courses After 12th Science Other Than Engineering

  2. #2
    That's the FAQ on TP-Link website which only suitable for old routers.
    http://www.tp-link.com/us/faq-193.html


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.