Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Question Port mirror contains non-mirrored traffic

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Using a SG105E switch in mirror mode. If the mirroring port is disabled via 'Port Settings' then it does not pass any mirror traffic even if selected as the mirror port in the 'Port Mirror' page. But if enabled in 'Port Settings' it will still send/receive normal traffic (broadcasts etc) in addition to the selected mirror traffic.

    It would be more useful to have the mirror port a 'pure mirror' rather than have to try to separate mirrored from normal port traffic. Is this possible?

  2. #2
    You can suggest it to the Support Team of TP-Link. But as I know, even the Managed Switch cannot do what you said, a pure mirror.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.