Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 7 of 7
  1. #1

    Unhappy Error No Sim detected

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi,

    I have bought a Archer MR200 2 month ago
    > firmware : 0.9.1 1.1 v004a.0 Build 160905 Rel.60037n (latest)
    > hardware : Archer MR200 v1 00000001

    It worked well until 2 weeks ago. Since I regulary have the same error (average once a day):
    SIM Card Status : "No SIM card detected. Please make sure that your SIM card is slid properly in the card slot."

    If I reboot the router (from the webadmin), the sim is well detected :
    SIM Card Status : "SIM card prepared"

    The SIM is a dedecated one, I do never get it out of the router.
    Moreover, the message is not appropriate : a hardware reboot fix temporary the problem, and I do not touch the SIM

    A factory reset didn't solve the problem.

    It would be great of someone has suggestions about this

    Regards

    Sébastien
    Last edited by s3b; 06-11-2017 at 17:32.

  2. #2
    Hi, it is same what hapened to me. But still no solution.

  3. #3
    Do you try a different sim card?

  4. #4
    Unfortunately I dont have card to test it.

  5. #5
    I cannot try different card I dont have it. And you?

  6. #6
    Hi,

    Same behavior for me ! Very annoying.

    A simple reboot and the problem is fixed...

    Firmware:
    0.9.1 1.1 v004a.0 Build 160905 Rel.60037n

    Hardware:
    Archer MR200 v1 00000001

    Does anyone has a solution ?

    Thank you !

  7. #7
    Junior Member jcmpes is on a distinguished road
    Join Date
    Sep 2017
    Posts
    1

    Did you try changing APN configuration?

    I am not sure if this will help you,

    Have you tried searching in Internet the APN details of your current ISP and editing them in the admin configuration of the MR200?

    When I was travelling last month I bought an MR200 and it worked with my spanish SIM card. But after 5 minutes it stopped working over and over again. Then I realised I had to edit manually the APN details and after that it is working without problem.

    Hope that helps,
    JC


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.