Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member rumcp is on a distinguished road
    Join Date
    Jun 2017
    Posts
    2

    Smile Problem at the time of printing a document using the print server - TL-PS110U

    Model : TL-PS110U

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Problem at the time of printing a document using the print server - It executes the printing of the document well, but at the moment when it finishes what is sent to print the printer repeats indefinitely what was previously printed; Could you please help me?

  2. #2
    Try to enable the “LPR Byte Counting Enabled”.
    Open Properties on the printer you want to share by print server.
    Select Port tab, choose the port your printer uses and click Configure Port.
    On the new window, tick "LPR Byte Counting Enabled"


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.