Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Junior Member gmcknight is on a distinguished road
    Join Date
    Jun 2017
    Posts
    1

    Specifications and Sizing of Solar Panel for CPE 510

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi
    I am setting up four locations for the CPE 510 and two of the spots will require off the grid power. My understanding is that the units draw 10.5 Watts and they run on DC power. Has anyone setup off the grid power for their locations only for a single unit.
    My base station has 500 watts, controller, inverter etc and the Mesh network uses only a fraction of this power. I am looking for a standalone solution

    Thanks
    Glenn

  2. #2
    Hi. Hope this helps (picture attached)
    Attached Images  

  3. #3
    Setup off the grid power at your own risk!!

  4. #4
    What's the hardware version on your CPE510?
    You may buy a POE injector with Voltage range: 16-27VDC,and power would be 1A.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.