Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Archer C9 - SMBv2 Support

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi,
    I have disabled SMBv1 on all of my devices as recommended here: https://blogs.technet.microsoft.com/...op-using-smb1/
    I can no longer connect to my storage via TP-Link router via SMB (Network Neighborhood). When will SMBv2 be supported on the Archer C9 v1?

  2. #2
    It's not the router, it's one or more of the devices on your lan that needs SMB1. I suspect your storage device is the culprit.

  3. #3
    Thanks for the reply, but unfortunately that's not the case. The router doesn't support SMBv2. This can be verified by looking at traffic when an SMB2 connection (negotiate request) is sent. The storage device is only a USB device plugged in to the router and therefor wouldn't support a network stack anyway.

  4. #4
    C9 V1 only support SMB1.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.