Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1
    Junior Member djgomes is on a distinguished road
    Join Date
    May 2017
    Posts
    1

    Exclamation NC250 camera won't stop restarting after firmware upgrade v1.2.1_170515

    Model : NC250

    Hardware Version :

    Firmware Version : 1.2.1_170515

    ISP : [/COLOR]

    Everything was working has expected until the firmware upgrade (NC250_v1.2.1_170515).

    Now the camera are in a restarting loop.

    Peeking the camera LOG I have encountered this critical error on Video Control module: "Streamd error, now try reboot".

    Can anyone help me solving the issue?

  2. #2

    turn off / on

    Just turn it off & on ...then go and buy Ntegear Arlo or Panasonic.

  3. #3
    i have this camera..and have trouble same with u..for sydney..tx u for u informaton..this help my problem,,

  4. #4
    if your camera still has a warranty, just send it to the service center.

  5. #5
    You can try reset the camera, if no luck, get a replacement

  6. #6


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.