Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 1 of 1
  1. #1

    TL-WR1043ND-v4 LAN/WAN ports stop working

    Model : TL-WR1043ND

    Hardware Version : v4

    Firmware Version : 160607

    ISP : [/COLOR]

    I bought the router about 2 months ago, everything seems to work Ok, except one thing:
    The LAN/WAN ports stop switching/routing traffic after some time (from one day uptime upto one week it occurs randomly). All LAN IP addresses are static, DHCP is turned off.
    Interface freeze may depend on the traffic and number of connections handled by the device. The LAN/WAN phy links are still establised, but no traffic is forwarded on the copper ports. The device is still accessible from wifi, but the logs don't show anything extraordinary except failed pppoe connection requests after that.
    Rebooting, or cold-restarting the device solves the issue temporarly.

    The latest stock firmware was loaded on the router: TL-WR1043ND(EU)_V4_160607

    Because of this, I installed OpenWRT, and LEDE to the device after one month, but the problem persists!

    Other people with the same issue:
    https://forum.lede-project.org/t/lan...d-then/2648/21
    https://github.com/freifunk-gluon/gluon/issues/1101

    I really hope its not a hardware/chipset problem and can be solved by firmware/software modification.
    Last edited by lacamester; 05-18-2017 at 09:44.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.