Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 1 of 1
  1. #1

    Unhappy MR6400 issues with IP over WAN network of 192.168.0.0

    Model : MR6400

    Hardware Version : v1

    Firmware Version : 160322

    ISP : [/COLOR]

    Have a few MR6400's around that are coded into our WAN network. All work fine unless the router is trying to get to 192.168.0.0 range across the WAN. Seems like the router holds IP 192.168.0.1 and 192.168.0.100 and even though the LAN IP is set to something different (ie in my case 192.168.37.1), it will not ping 192.168.0.1 but will ping all other subnets (eg 192.168.1.1, 192.168.3.1) across the WAN. When I try and add a static route for 192.168.0.0 it comes up with error "destination network address cannot be inside the subnet of WAN ip". Anyone else experience this issue and any way to resolve?
    Last edited by Damo73; 05-08-2017 at 04:57.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.