Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Setting static LAN IP addresses

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have servers and a printer on my LAN which are currently setup with static IP addresses. How do I set these up on the Deco M5? Also, is there an ETA on the AP mode that was mentioned in the other threads?
    Last edited by rockadile; 05-04-2017 at 12:39.

  2. #2
    Currently, Deco doesn't support to assign static IP addresses to different devices.
    However, it will support it in future firmware updates by adding a new feature called Address Reservation. In addition, AP mode will be added as well.

  3. #3
    What version of firmware will have this feature? I'm on 1.2.12 and still unable to assign specific static IPs to clients.

  4. #4
    it's available on 1.2.12 unless deco is set in Access Point mode. http://www.tp-link.com/en/faq-1795.html


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.