Archer VR900R V1 - how to setup as wlan access-point
Model : TP-Link AC1900
Hardware Version : Archer VR900v v1 00000001
Firmware Version : 0.9.1 1.2 v0048.0 Build 161114 Rel.50112n
ISP : [/COLOR] not used - only used as access point with the local wired network
How I can setup the Archer VR900v V1 as WLAN-Access-Point? I want to use the same IP-Subnet on the wlan and the wired net. The main-dsl router make the dhcp server.
Last edited by heitei; 04-19-2017 at 20:05.
I have'd solve the problem with this configuration steps:
1. Betriebsart/Modus: not changed! 1 - DSL-Modemrouter
IP-Adress - from the range of the local subnet - but not a IP from the dhcp-range of the main-router
DHCP-Relay set to "on" - IP-Adress of the remote server: set to the main-router ip-adress
==>>> erster/first restart/reboot
Then login to the router from a wired pc and configure the rest:
WLAN-settings - normal, with unequal SSIDs for the 2.4 and 5G-Net; with passwords
==>>> zweiter/second restart/reboot
I can login!!! fine!
NAT - ALG - all otions are set to "off" - but it are too functional with the setting of "on"
Tags for this Thread