Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    EAP Controller Software Auto Restart

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I had installed 12 units EAP 115 into my client side with EAP controller software install into a PC, but I have few issue about the controller setting
    1. Any where can set schedule reboot for individual AP? I only can set schedule reboot for all AP in the same time
    2. any easier way to set auto start up when EAP controller's PC restart?

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Why would you want to schedule a reboot of the EAPs at all?

  3. #3
    To make sure the AP can runing proper.

  4. #4
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    I see. Kind of a Windows compatibility mode.

    However, the EAPs run 24/7 without any reboots constantly and stable, at least for me.

  5. #5
    Agreed, my EAP-245 has been running a solid month with no reboots. Reboots should only be done if the device is actually malfunctioning or performing particularly poorly (and you've confirmed it's not a client-side issue!).

    If you do need to schedule AP reboots programmatically, the following curl request might be a good starting point (this is what's called when you click the "single reboot" button on a given AP and confirm the dialog):
    curl 'https://EAPC:8043/monitor/rebootAp' -H 'Cookie: TPEAP_SESSIONID=00001111-2222-3333-4444-555566667777; gsScrollPos=; TPEAP_LANGUAGE=en' \
      -H 'Origin: https://EAPC:8043' -H 'Accept-Encoding: gzip, deflate, br' -H 'Accept-Language: en-US,en;q=0.8' \
      -H 'Content-Type: application/x-www-form-urlencoded; charset=UTF-8' -H 'Accept: */*' -H 'Referer: https://EAPC:8043/home.html' \
      -H 'X-Requested-With: XMLHttpRequest' -H 'Connection: keep-alive' --data 'apId=000000000000000000000000'
    Three important points:
    * EAPC is your EAP Controller hostname/IP
    * 000000000000000000000000 is your AP ID; you may need to examine requests using your browser's inspector to get this, as I don't see any place to find it in the UI.
    * You will need to generate a session ID cookie (TPEAP_SESSIONID) prior to sending this request to use in the request.

  6. #6
    1.You can't reboot a single AP periodically. Maybe next eap controller will add that feature.
    2. http://forum.tp-link.com/showthread....highlight=NSSM I found this post might be helpful


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.