Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    CPE210 Repeat same stations on AP status

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi

    I have a system on farms with cctv cams.
    A CPE210, with new firmware do same as before, configured as AP, and 3 others like clients.
    Each client have watchdog activated with AP IP.
    When have video loss on cams I saw on AP stations status repeated station, some time 8.
    Repeated station with same MAC address on stations status.
    I think firmware have a bug.
    Sorry my english !

    carlos lopes (Portugal)

  2. #2
    Technically if more stations appear with the same MAC address, it is usually due to which more devices are connecting from that station, and all come out with the device masking station ...
    Question ... it has been ensured that no one else has the connection credentials ...

    Regards...

    can you writeme to my whatsapp In perfect Spanish, of course before you do consider my time zone -5gmt
    My contact details are in my signature
    Victor A. Ramos M.
    va.somar.m@gmail.com
    WhatsApp +51980989627

    ==== if you want to send a personal message, consider my time zone (-5GMT Perú)====
    ==================== my sleep time is sacred ===================

  3. #3
    What really happen is CPE210 as client, and ping active to AP IP, some days later, have multiple stations on AP status.
    This only happens if ping active on client.
    Client only have an IP camera.
    All CPEŽs have password activated.

  4. #4
    What I mention is strange ... but I would not be surprised by the working mode in which the CPE is configured ... Client mode, each device will be masked with the mac address of the CPE, so in the root AP, it should show Associated with:
    1.- CPE itself with its own IP and MAC Address ...
    2.- The Camera, with its own IP but with the MAC address of the CPE ... you should consider this ...

    The most recommended would be to create a bridge for the camera to display its own IP and MAC address to the AP ...
    Victor A. Ramos M.
    va.somar.m@gmail.com
    WhatsApp +51980989627

    ==== if you want to send a personal message, consider my time zone (-5GMT Perú)====
    ==================== my sleep time is sacred ===================

  5. #5
    Quote Originally Posted by carlos lopes View Post
    What really happen is CPE210 as client, and ping active to AP IP, some days later, have multiple stations on AP status.
    If the duplicate MAC addresses appear in the ARP Table status, see Victor's answer #4 why this is so (on the AP's side only).

    If they indeed appear in the Stations status, please post a screenshot.

  6. #6
    I configured client without ping test since yesterday and this morning only the two clients CPE210 are on AP CPE210 status table.
    Today IŽll change configuration of one client with ping on.
    If trouble happens again IŽll do screenshot of configurations.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.