Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member ViceEmargo is on a distinguished road
    Join Date
    Apr 2017
    Posts
    1

    TL-SG108E Dysfunctional?

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have installed a TL-SG108E switch into my network; the only configuration is it's TCP/IP settings.
    Network: 10.0.0.0 /24
    IP: 10.0.0.2
    Subnet Mask: 255.255.255.0
    Default Gateway: 10.0.0.1

    Port 1: PC - 10.0.0.254
    Port 2: PC - 10.0.0.150
    Port 3: Access Point
    Port 4: Down
    Port 5: Router - 10.0.0.1
    Port 6: Down
    Port 7: Down
    Port 8: Down


    With this basic configuration, I can get to the Internet and back, however, wired devices connected to the switch cannot connect/ping to eachother. HOWEVER
    I can ping from a wired device, to any IP that is on the wireless network, which is also a connection between the switch and the access point.
    Also, wireless devices cannot ping wired devices, but can ping wireless devices.
    I really have no clue what is going on, this is configuring the switch with only its basic TCP/IP settings.
    I could really use some help.

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,128
    If you suspect your TL-SG108E to be broken, reset it to factory defaults - or if this does not help, re-install latest firmware - to test the connectivity between devices connected to it. Test the connectivity w/o any switch setup and make sure the connected devices are indeed on the same network and don't block ICMP requests. If it still does not work, consider to RMA the switch.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.