Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Portal of EAP110 slow / not loaded

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi any body please help about my trouble

    i have enabled my portal in EAP110 but that make very slow to load the portal page and also not loaded (mostly)
    i have 2 EAP110 close together with same SSID, different channel, without password, standalone mode (without controller)

    so i just use portal local password for authentications

    when i check the CPU & memory usage are fine
    when i try my self, i mean for testing the portal working good everything ok

    but when real install after some hours, the portal page doesn't loaded

    i guess, because so-many users connected to that AP (because no password at wi-fi just only password at portal login) so make AP over-limit the user
    is it like that the algorithm inside of EAP110, the user counted although just only connected but not login the portal ?

    and how to solve it ?

    Thanks

  2. #2
    Quote Originally Posted by kurniadi View Post
    i guess, because so-many users connected to that AP (because no password at wi-fi just only password at portal login) so make AP over-limit the user
    Why don't you limit the maximum associated number of users of the EAPs (under "load balancing") if you suspect an over-limit? Set it to 20 users, but depending of typical usage profile at your site your mileage may vary.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.