Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member JimiH is on a distinguished road
    Join Date
    Mar 2017
    Posts
    1

    TL-R470T+ parameters

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello,

    I just bought a TL-R470T+ but I have some difficulties to do what I want (even to start)

    I want to use it to secure a alarm system.
    I have another router providing internet which I connect to the WAN1 on the R470T+ then on the Port 2 I connect a Raspberry PI then on the Ports 3 to 5 IP cameras.

    What I want to do is to allow the RPI and only the RPI to access internet from WAN1 and the RPI can access the cameras but I want to make sure the cameras cannot access Internet, but only the RPI (and of course the cameras should not be accessible directly from Internet).

    Could anyone help me with the parameters to apply ?

    thank you in advance

    Jimi

  2. #2
    Members Panda is on a distinguished road
    Join Date
    Aug 2016
    Posts
    122
    The Access Control can do the job you described.
    Block the IP of cameras to the Internet and allow the IP of RPI to the Internet.
    Source IP is the one you want to control while the Destination IP is 0.0.0.0.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.