Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    TL-R480T+ - Multi-Nets NAT question.

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]



    Can someone confirm TL-R480T+ support the following function with Multi-Nets NAT and Load Balance ?.

    LAN users access Server network+ internet over WAN1 (connected to a p2p link only routing enabled), NAT must NOT be enabled for WAN1.
    Direct Broadband with ppoe is connected to WAN2, NAT must be enabled.

    When WAN1 link is down, it should automatically failover to WAN2 and users access the internet thru broadband.

    Thanks,

  2. #2
    LAN users access Server network+ internet over WAN1 (connected to a p2p link only routing enabled), NAT must NOT be enabled for WAN1.
    Direct Broadband with ppoe is connected to WAN2, NAT must be enabled.

    For the NAT disable, I think maybe one to one NAT can support this, and the NAT enable must be OK.

    When WAN1 link is down, it should automatically failover to WAN2 and users access the internet thru broadband.

    This can be achieved by the function link backup.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.