Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member HEART OF DARIUS is on a distinguished road
    Join Date
    Mar 2017
    Posts
    1

    Static IP for my new HS100 smart plugs

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Is there any way to set a static IP in my new TP-Link smart plugs?

    If so, how?

    Can I change the network name, also?

  2. #2
    Junior Member Martin Underwood is on a distinguished road
    Join Date
    Oct 2016
    Posts
    2
    The best way is to do this at your router, if it supports "Address Reservation". Find the HS100 under its current IP address in your router's Client List, and note down the MAC address. Now navigate to the router's Address Reservation menu and enter the MAC address and the required IP address. Whenever the HS100 reboots (eg when it is powered off and then on) it will be given this same address.

    Doing it this way doesn't require any reconfiguration at the HS100 (if this is even possible).


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.