Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Junior Member bmrmx is on a distinguished road
    Join Date
    Mar 2017
    Posts
    1

    How to restrict a internal IP to specific WAN port - TL-R480T+

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    In my network I have some PCs that do not allow changing the IP address during the application session.
    And the router in my network is the TL-R480T +, currently has 2 internet links, and embreve will have 3.
    Does anyone know of any configuration on this router that I can set as a route for an internal IP address?

    (Sorry for my English)

  2. #2
    Members Panda is on a distinguished road
    Join Date
    Aug 2016
    Posts
    110
    You just need to configure the Policy Routing.
    Name:  policy routing.jpg
Views: 0
Size:  56.6 KB
    Put in your source IP of the PC, and choose one of the WAN port you want to restrict to. Leave the destination IP as 0.0.0.0.
    Hope can help you.

  3. #3
    Hi Panda,
    Thank you for your reply.
    I'm a little bit confused about the source IP. Both WAN has a different Static IP. Which one should I input?

  4. #4
    Members Panda is on a distinguished road
    Join Date
    Aug 2016
    Posts
    110
    Quote Originally Posted by Josh View Post
    Hi Panda,
    Thank you for your reply.
    I'm a little bit confused about the source IP. Both WAN has a different Static IP. Which one should I input?
    Hi Josh

    The source IP should not be the WAN IP, it should be the LAN. If you want to restrict one of your LAN device or range of them, you can put their IPs in the box.
    You can refer to the UG on page 64. http://static.tp-link.com/TL-R480T+(...373750990j.pdf


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.