Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4

Hybrid View

  1. #1

    Problem on VPN600 and dyndns

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have 15 units to create a nation wide VPN and the client of DYN:COM on the unit is not refreshing IP Adress automaticaly

    i get on line using ip click on logout, then login and the ip is refreshed

    is there a fix or what can i do to resolve this issue

    (some of the locations have very poor internet and loose conection very often)

  2. #2
    Do you mean the function of DDNS cannot work normally? Can you check the state on the DDNS server side when the issue happen?

  3. #3
    Model : VPN600

    Hardware Version : v2

    Firmware Version : TL-R600VPN_V2_140801

    ISP : : TELMEX INFINITUM

    the ddns server is working ok, but the client on the router does not refresh the ip address, i get on the router and run manually the logout, then login on DDNS and the ip refresh


    [/COLOR]

  4. #4


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.