Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member abbedijkstra@gmail.com is on a distinguished road
    Join Date
    Mar 2017

    EAP220 not accepting IP address assigned by DHCP

    Model : EAP220

    Hardware Version : Not Clear

    Firmware Version : 2.0.3

    ISP : Online.nl[/COLOR]

    I have 3 EAP220 aps. Two of them adopted beautifully, but 1 does not. In the EAP controller I see that the two that adopted normally, got IP addresses in the 192.168.1.XXX range (which is the range that my router hands out), but the one that won't get adopted has (which turns out to be it's fallback IP address). If i force my ethernetcard to use .0.XXX then I can access the AP via webinterface, that works fine. I have updated the AP to 2.0.3 (latest firmware), but that didnt help. I tried resetting the AP with the reset butoon on the back, but same story. Is it possible this particular AP is broken right out of the box, or am I missing something?

    Any help would be greatly appreciated!

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    What happens if you set an otherwise unused static IP from the subnet on the third EAP?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.