Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    TP-LINK® ’s HS200 Smart Switch doesn't work

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]


    I have connected the smart switch with my iphone app, and when I tried to turn on the switch, the lights blinked once, but off right after that although the status in the app says the lights are on. How can I fix that?

  2. #2
    If you mean the HS200 switch blinks, drops, and restarts, it's probably a wiring problem. Check for lose connections, esp the white/neutral wire. If it's not that then you may have "power through fixture" wiring and the HS200 may not work there.

  3. #3
    The problem is the actual light I want to control, not the light on switch. Is there a way to verify if my wire is "power through fixture"? If I don't connect the white wire, the symptom is the same.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.