Typical VPN PPTP cannot access Lan clients through VPN

[anthonymaddick]

Model :

Hardware Version :

Firmware Version :

ISP : [/COLOR]

Hi All,
I have TP Link Modems in bridge mode and the Router is set to PPPoe and the internet is working fine on both sites.
The VPN is connected and i cann access both routers on each end but not any LAN clients ie from the 192.168.10.x network i can access the router at 192.168.0.1 but cannot ping or access the pc at 192.168.0.2.
i have searched around online and this seems to be a common TP link VPN router issue.
The only thing im a little unsure about is the IP Pool on the Server VPN end.

Can you please assist or get someone to assist me.
Am i correct in thinking that i should be able to access LAN computers from both sides?

[anthonymaddick]

OK so to fix this issue i have figured out that you cannot run a PPTP vpn. i configured an ipsec as per this guide static.tp-link.com/resources/document/VPN_Config_Guide.pdf as the guide is for two differ models i just did the config the same way for the two routers all is now working. i can ping pcs on each remote site not just the routers.

[Panda]

Hey, dude
Could you tell me where you get this document? I cannot find it on the TP-link website.

[R1D2]

Could you tell me where you get this document? I cannot find it on the TP-link website.

http://static.tp-link.com/resources/...nfig_Guide.pdf