Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member Tesla is on a distinguished road
    Join Date
    Feb 2017
    Posts
    1

    TL-WA5210G power off itself suddenly.

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello I have had two similar cases with the 2.4GHz High Power Wireless Outdoor CPE Model No. TL-WA5210G. The CPEs starts working well, but some moths later, the CPE experiment a wrong behavior. The CPE starts to working so few seconds later the CPE reboots again. In the first case, I used Paduit Cat 6 and it resolve the problem. So I don't know what is the problem because in my second case I sustitute the POE cable and use a short UTP Cat 6 (8 meters), this action resolve the problem parcially but the problem return some time.

    P.D

    The wire length from POE to CPE is 25 meters max.

  2. #2
    Can use Panduit F/UTP FTP CAT5e or CAT6 with plug shielded.
    CPE210 is better.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.