Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Exporting Traffic Statistics

    Model : VR2600

    Hardware Version :

    Firmware Version : 1.4.0 0.8.0 v0050.0 Build 160518 Rel. 50944n


    I have been using TP-Link modem routers for a while now. Used W8980, W9980 and now VR2600. Whenever there is an internet congestion in my home LAN i try to see the culprit device since i have about 25 devices connected through the VDSL modem-router. Unfortunately, VR2600 only allows to see this info through Traffic Statistics page which also includes the LAN traffic aside from device based WAN traffic.

    Better than nothing, i try to live with this. However, it would be more than nice i i could access these statistics through my iphone or a PC, without logging in to the modem. There is no way to export traffic statistics to any device. I tried syslog on my NAS, i can see system logs of the VR2600 from the NAS however, traffic statistics only resides on the modem itself.

    Is there any way to export these statistics, or any other method to see the internet bandwidth consuming per device on may LAN? Will SNMP help? I also tried to reach stat.htm page directly on the modem but it gives 403 Forbidden error. every time i have to login, go through menu items and try to rmemeber which ip is which device.
    Last edited by febz11; 02-25-2017 at 12:43.

  2. #2
    I can now get the statistics from the modem with:

    curl -d $'[STAT_CFG#0,0,0,0,0,0#0,0,0,0,0,0]0,0\r\n[STAT_ENTRY#0,0,0,0,0,0#0,0,0,0,0,0]1,0\r\n' --referer http://192.168.1.1/ --header "Cookie: Authorization=Basic `echo -n password | base64`" --header "Content-Type: text/plain; charset=UTF-8" "http://192.168.1.1/cgi?1&5"

    change password by your admin password. 192.168.1.1 is my modem IP. The outcome is like:
    [1,0,0,0,0,0]1
    ipAddress=3232235876
    macAddress=XX:XX:XX:XX:XX:XX
    totalPkts=525
    totalBytes=45283
    currPkts=0
    currBytes=0
    currIcmp=0
    currUdp=0
    currSyn=0
    currIcmpMax=1
    currUdpMax=20
    currSynMax=14

    After i parse this i will be able to use it anywhere i like.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.