Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Feb 2017
    Posts
    1

    Problemas com Switch 8-Port Gigabit TL-SG108E

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Boa tarde, estou configurando alguns swithcs TL-SG108E, mas em três aparelhos ele apresenta o seguinte problema.
    Vou para mudar a configurações das portas para 1000MF, apos aplicar o led da porta lan switch apaga e fico sem acesso a ele novamente, só funciona apos eu resetar ele. .

    Segue 2 prints da configuração, apos a aplicação da configuração perco acesso ao switch.

    Name:  config.png
Views: 0
Size:  32.1 KBName:  config1.png
Views: 0
Size:  106.3 KB

    Espero que possam me ajudar, Obrigado.

  2. #2
    That happens all the time. Use that utility just once, to configure IP address. Then access the switch through its browser interface - this is much more reliable than that utility program.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.