Access to bank site only by WAN1
Hardware Version :
Firmware Version :
ISP : [/COLOR]
We need local network computers to access the bank's web site only through WAN1, all other traffic usually through load balance ...
How should I configure for this rule to work only for a particular site?
You can achieve it by the function called Policy Routing.
Refer to the link below:
Policy routing configured, not yet working ...
In: Load Balance >> Configuration >> General
"Enable Application Optimized Routing"
"Enable Bandwidth Based Balance Routing"
* These "options", enabled or disabled?
I'm sorry, I'm weak English, I'm Brazilian, learning ...
Thanks for helping
Never mind. This forum is used to helping each other. The two options you mentioned should be checked if you need to use the Load Balance function.
Originally Posted by rjunai
The option Application Optimized Routing can make sure your IP won't change when you access to a security website like a band site.
And the option Bandwidth Based Balance Routing can make sure the Load Balance function work.
Mr. J, thank you for helping me ...
Here it works for "Effective Time" for: 00:00 - 23:59
Default: 00:00 - 24:00 - does not work ...
Hello Friend, how are you?
I came across this problem too, have managed to solve with these settings?