Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Managing TL-SG105E

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi Guys,

    After searching quite a bit and not finding anything on this forum or big old Google, I decided to post a message on the Forum to see if I get any luck. So my problem is that I cannot ping both switches I have neither from the Gateway nor the Client, I have setup an IP address from my Management Network Gateway has Router-On-a-Stick implemented and I can reach all VLAN's correcly. All switch ports are VLAN1 (default) tagged but the IP I setup on the Switch Utility is from VLAN50, but I don't think this is the problem.

    By the way, do you know if these switches can be found through LLDP?

    Best Regards,

  2. #2


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.