Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Junior Member sascha_focus is on a distinguished road
    Join Date
    Jan 2017
    Posts
    1

    Exclamation TL-SG108E Bandwidth Control

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi, I would like to use 4 port with bandwidth control. I have port 2, 3, 4 and 5 set to Ingress Rate 2048 and Egress Rate 10240.
    But when I start a Speed test, only the Download Rate is limited. The Upload is completely unrestricted.
    Do I have to adjust something else?

    Best Regards

    Sascha

  2. #2
    You could contact the TP-Link support for help first i think. But i need to mention that there is less people make bandwidth control in easy smart switch, it is strange also.

  3. #3
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,205
    Quote Originally Posted by sascha_focus View Post
    But when I start a Speed test, only the Download Rate is limited. The Upload is completely unrestricted.
    Works for me (tested with TL-SG108E and TL-SG108PE @latest firmware using iperf):

    Ingress bandwidth 2048 Kbps, egress 10240 Kbps:
    Name:  bw1.png
Views: 0
Size:  19.6 KB

    Ingress bandwidth 10240 Kbps, egress 10240 Kbps:
    Name:  bw2.png
Views: 0
Size:  16.8 KB

    Unlimited bandwidth:
    Name:  bw3.png
Views: 0
Size:  16.8 KB

    Initial spikes probably come from buffering.

    Which speed test did you use?


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.