Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 8 of 8
  1. #1

    TL-SG105e and Starhub IPTV (Singapore) issue

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi,

    I have bought 2 TL-SG105e switches which I'm trying to setup and configure in the same way as you can see on the picture.
    But it seems like I can't really make it work?

    When I connect the two switches via port 1 - I don't get any green lights in port 1 on both switches?
    The cable from switch 1 (port 1) goes to switch 2 (port 1) via a small patch panel

    Starhub is using vlan 1091 for IPTV.

    Any idea what I'm doing wrong?

    Much appreciated!
    Thanks!

    Name:  switch setup.jpg
Views: 0
Size:  23.6 KB

  2. #2
    If you don't use small patch panel, just connected two switch by cable directly could they work? You could also do the cable test in switch web page. Or change another ethernet cable.

  3. #3
    Hi Johnson,
    I managed to get it working - I had to tag port 3 as well and it worked.
    Thanks.

  4. #4
    Quote Originally Posted by elaurs View Post
    Hi Johnson,
    I managed to get it working - I had to tag port 3 as well and it worked.
    Thanks.

    So what is your final configuration setting?

    Mind to share.

    Thanks

  5. #5

    My final configuration for Starhub.

    Hi,

    here is my final vlan configuration on my switches, which works very well.
    Name:  Capture1.PNG
Views: 0
Size:  21.0 KB

    I hope this helps you.

    Thanks.

  6. #6
    Quote Originally Posted by elaurs View Post
    Hi,

    here is my final vlan configuration on my switches, which works very well.
    Attachment 6713

    I hope this helps you.

    Thanks.
    Thank you.

    Happy 2018 !

  7. #7
    Quote Originally Posted by elaurs View Post
    Hi,

    here is my final vlan configuration on my switches, which works very well.
    Attachment 6713

    I hope this helps you.

    Thanks.
    So your PVID setting will :

    Port ---- PVID
    1 -------- 1
    2 ---------1091
    3 -----------3
    4 ---------3 or 1
    5 ---------3 or 1
    Last edited by sportyant; 01-02-2018 at 09:09. Reason: typo error

  8. #8

    My final configuration for Starhub.

    Yes - almost. :-)

    Name:  Capture2.PNG
Views: 0
Size:  7.4 KB

    Happy 2018 to you too ;-)


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.