Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    TL-ANT2424B set-up

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    So my sister got me this antenna for xmas, what would i need to hook it up to send a signal to a different location.
    Any ideas and help will be greatly appreciated.

  2. #2
    Members kevsh is on a distinguished road
    Join Date
    Apr 2014
    Posts
    102

    2424b setup

    You will need a short piece of cable, tp link ANT24PT3. I don't know which brand of router or access point u may own. Some have TNC connectors others have sma. If the router is tp link your good to go with the coax I described.
    That antenna should be placed outside for performance

  3. #3
    Most important beside the pigtail mentioned by kevsh you would need the same - or at least a similar - antenna like TL-ANT2424B on the other side of the link to be able to communicate over long distances. If the link is over a short distance only, you probably can receive weaker signals sent by some other antennas, but to make use of the power and reception sensitivity of TL-ANT2424B it's best to use two of them at each side of the link.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.