Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Junior Member steve0 is on a distinguished road
    Join Date
    Dec 2016
    Posts
    1

    SG1024 VLAN for nComputing Thin Clients

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello,

    Would you help advise which VLAN settings I would need in order to keep red nComputing thin clients to only broadcast in red VLAN and blue nComputing thin clients to only broadcast in blue VLAN but their workstations (1&2) can communicate with everything else in green.

    Thanks
    Steve

    Attached Images  

  2. #2
    Name:  tplink.jpg
Views: 0
Size:  39.7 KB
    I attach each port for better understanding. And here i configure VLAN2,3,4 for each part you want. Then the configuration should like: VLAN2: port1,2,3; VLAN3: port4,5,6; VLAN4: port3,4,7,8,9,10; Ports should be untagged in each VLAN. Port1,2,3 PVID should be 2; Port 4,5,6 PVID should 3; Port 7,8,9,10 PVID should be 4. Try to make it work.

  3. #3
    Members ChimB is on a distinguished road
    Join Date
    Nov 2015
    Posts
    105
    hi federer, I suggset you contact tplink support for more professional help

  4. #4
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,127
    Quote Originally Posted by ChimB View Post
    hi federer, I suggset you contact tplink support for more professional help
    federer's answer to steve0's question was already professional enough. TP-Link support couldn't improve that either.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.