Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    Lightbulb TP-Link MC100CM Version 3.1 Power Supply 5-6 Volt??

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    We bought this product TP-Link MC100CM Version 3.1.
    But for our applicatioon, we have a min power supply of 5-6 Volt.
    I tried to find in instruction Manual which supply ran can be used, but it was only written that we need to use the power supply they sent (which is 9v),
    Can someone inform me if its possible with 5-6 Volt? or do i need a step up DC converter?

    thank you

  2. #2
    Members Mr.J is on a distinguished road
    Join Date
    Aug 2016
    Posts
    115
    Hi, the current and the voltage of a adapter means the max current and the standard output voltage it can support. Actually, if you want to replace the adapter of a product, you must make sure the voltage be same with the old one.

  3. #3

    TP Link MC100CM Version 3 1 Power Supply 5 6 Volt

    Now Im getting a new big lens, I need a new IR filter - a 77mm one Hoya are after about a hundred quid, but Ive just found Link-Delight in ebay, where they are selling same for only FOURTEEN quid inc post Anyone used any of Link-Delight's stuff ? Any good ??Ta

  4. #4
    Yes I am concern with that. But we just have a power of 6VDC in our test system.
    Before I start designing a step up to 9VDC, I want to know if it will work as well with 6VDC.

  5. #5
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,010
    Quote Originally Posted by amalia View Post
    Yes I am concern with that. But we just have a power of 6VDC in our test system.
    Before I start designing a step up to 9VDC, I want to know if it will work as well with 6VDC.
    According to the data sheet, it should work:

    External Power Adapter, 9V/0.6A or 5V/1A

    See http://static.tp-link.com/resources/..._Datasheet.pdf, search for MC100CM, Specifications->Power Supply.

    But better try it before deploying the MC100CM in your test system.
    Last edited by R1D2; 02-22-2017 at 09:12.

  6. #6
    ooo that is very helpful... in the package we got completely different datasheet. The information was only that we should use the power supply we have in package.
    Thank you R1D2...
    i will try it as well. Hope it works


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.